產品介紹 Products
水對水螺旋式熱泵熱水機組(冷熱兩用)

型錄下載 60Hz

型錄下載 50Hz

以蒸汽壓縮方式做成的水對水熱泵熱水機,以製熱為主,供應熱水做產業空調的再熱功能;農業溫室加溫、民生用水加熱。以製冷為輔,供應冰水做產業空調的冷卻、除濕、農業低溫催花、居家、辦公冷氣。一機雙用,其特點如下:

►省錢
只需負擔製熱的電費,同時供應熱水,免費使用冷氣。
►節能
熱水、冷水同時使用,不排出餘冷及餘熱,能源利用率最高。
►安全
機組以電力操作,不會因燃燒不完全產生CO2中毒危害。
►環保
過程CO2排放量最低,不產生硫化物、PM2.5等有害氣體。
►便利
分別與既有空調系統冰水管及鍋爐系統熱水管連接,不需安裝冷卻水塔。
機組結構:
►壓縮機
選用半密閉螺旋式(熱泵專用)壓縮機,高壓縮比,可依負載大小,分段調整其排氣量,達到加、卸載的功能。
►冷凝器
選用殼管式冷凝器,依產業及民生應用之溫度需求、水側材質匹配專屬的冷凝器。
►冰水器
選用殼管式冰水器,依使用之溫度需求匹配冰水器。
►冷媒流量控制
感溫式膨脹閥,精確控制冷媒系統的過熱度。液噴射電磁閥,確保壓縮機不致過熱。
►人性化操控管理
採用PLC可程式控制,具備自動啟動前檢查、警報記錄及自我診斷功能,精確控制冰、熱水器回水或出水之溫度。採觸控式液晶中文顯示之LCD人機介面、網路監控連線及數位化溫度、耗電量等感測。內建萬年曆及時間功能,可設定整年假日與非假日之開機/停機時間,並記錄運轉狀況、運轉時數與維修保養預警,有效提升系統管理。對溫度、壓力、過載、防止壓縮機頻繁啟動、逆向運轉等作最有效保護,當機組滿載或部份負載時,皆能保持高效率、安全及穩定之運轉。控制配合RS-485通訊埠,以MODBUS (ASCII/RTU)通訊協定,可配合其他中央監控資訊服務,或使用本公司無線網路監控系統,透過雲端伺服器利用手機或遠控控制面板作開/關機及監控功能。

Water to water heat pump unit use the vapor compression cycle for air condition reheating, mainly heat-making, supply hot water for agricultural greenhouse heating, general water heating. To cool as a supplement, to supply of ice water for air-conditioning cooling, dehumidification, agriculture low temp. flower forcing, home & office etc., One machine for two uses, its characteristics are as follows:
►Save money
Simply pay for the heating of electricity, while supplying hot water and using air conditioning for free.
►Energy saving
At the same time the use of hot and cold water, do not discharge the residual cold and heat, energy efficiency is the highest.
Safety
To operate with electricity, it will not cause CO2 poisoning hazard due to combustion incomplete.
Environmental protection
CO2 discharge are lowest in operation, and no harmful gases are produced such as sulfides and PM2.5 etc..
►Convenient
Can be connected to the existing air conditioning system pipe and boiler system hot water pipe, no need to install cooling water tower.
Unit structure:
►Compressor
Use semi-hermetic screw (heat pump special) compressor, high compression ratio, according to the capability of loading to adjustment of its discharge volume, to achieve the function of loading or unloading.
►Condenser
Use shell and tube type. According to the industry and daily application temperature demand, water side material according to the custom-made of condenser.
►Chiller
Use shell and tube type. According to the industry and daily application temperature demand, selective assembly of chiller.
►Refrigerant flow control
Use thermo expansion valve and accurate control super heat of refrigerant system, Use liquid inject magnetic valve and make sure compressor won't be overheating.
►Humanized management control
Adopt PLC programming control intelligent unit to perform a series of pre-start checks, alarm recording and self-diagnosing, and have the processing of the heat pump unit and chiller returning or leaving water temperature precisely controlled. Using touch control human-machine LCD interface displayed in Chinese, network monitoring and digital temperature sensors, power meter, etc. The in-built perpetual calendar and clock help you to set the time to start or stop the unit on holidays or non-holidays, and help you to record the unit working status, running hours and notice the maintenance alarm to keep the system managed efficiently. The unit is protected from high temperature, high pressure, compressor frequently ON/OFF and compressor running in reverse so as to keep the operation safely and stable with high efficiency no matter running at full load or partial load. Control with RS-485 communication port, use MODBUS (ASCII/RTU) communication protocol, can be combined with other central monitoring information services, or use the company's wireless network monitoring system, through the cloud server using cell phones or remote control panel for on/off and monitoring functions.